Главная   Форум
Добро пожаловать, Гость
Пожалуйста Вход или Регистрация.    Забыли пароль?

Stand Alone Software defined Radio =SunSDR-MB1=
(0 чел.) 
SunSDR transceiver, ExpertSDR software and other ...
ВнизСтраница: 1
Сообщения темы: Stand Alone Software defined Radio =SunSDR-MB1=
#4937
VassiL
Разработчик SDR-техники, Developer of SDR
Модератор
Постов: 857
Пользователь в оффлайне Кликните здесь, чтобы посмотреть профиль этого пользователя
ICQ#: 473527881 Пол: Мужской expert_electronics Expert Electronics - SunSDR 123 Страна, город: Taganrog День рождения: 04/15
Stand Alone Software defined Radio =SunSDR-MB1= Добавлено 06.08.2013 16:32  
On the "Maykop 2013" HAM Fest for the first time was presented new concept of HAM Stand Alone Radio based on new DUC/DDC technologies via our transceiver SunSDR2. This is a "SunSDR-MB1" HF/6M/VHF transceiver.
So.. In one box we have : Full PC(Micro-ITX PC, Intel Core i5 CPU, full blown Windows 7 (or Linux Ubuntu)), transceiver's hardware core based on SunSDR2 transceiver, 125W PA, PA LPF, ATU(option), Antenna switch, GPS receiver(option), WLAN(option), 7" display, Fully reprogrammable front panel (all buttons and all knobs), green highlight of all buttons and a main knob. Also additional HDMI connector for external a big display.
User can push one button (20 sec start time/ 5 sec finish time) and can works in radio air without Keyboard and mouse. If customer wants he can use mouse and keyboard for extended transceiver's control and for working with Logger, DIGI software etc., which installed inside the transceiver.
It is more than a simply clasical transceiver, it is more than simply monoblock (PC+SDR), this is new generation in HAM transceivers - fully DUC/DDC Software Defined Radio, fully Software Defined Front control panel!


Features:
Software: ExpertSDR2 (own software)
Direct conversion in RX/TX mode, in HF/VHF bands
Frequency range 0-80MHz, 80-160MHz
Wide band spectrum panadapter up to 80MHz
Two independent receivers
Full duplix mode (in the future - software defined).
High dynamic range of receiver: up to 119-120dB in the HF, and up to 114dB in the VHF.
Output power, nominal: 125W(HF), 30W(VHF)
IMD3 DR of transmitter: about 30-40 dB
Reference 10 MHz input
Very small CW delay: 10ms
ADC sample rate: 160MHz
ADC resolution: 16 bit
SFDR receiver: 78-82 dB
DUC sample rate: 360MHz
DUC resolution: 14 bit
High perfomance 24 bit Audio Codec on board
Connect to PC: LAN/WLAN(Ethernet/WiFi 802.11 g/n)
Power supply: 12-15V 1A(RX)/5A(TX)/ 220V 1.5-2 A.
Size: 370x160x270mm
Weight: 10 Kg

Inputs/outputs:
Two VHF antenna connector(SO239)
Two HF antenna connectors(SO239)
Wide RF input port direct connect to high speed ADC(SMA)(for XVTRX, measurement etc.) (SMA)
Wide RF output port direct connect to DUC(SMA)(for XVTRX, measurement etc.)
RX Out, uses with external BPF, ATT, P.AMP and ADC IN. (SMA)
Reference 10MHz input connector(SMA)
WiFi antenna connectors for 801.11 g/n up to 300Mb/s WAN(SMA)
ALC input port(RCA)
PTT input port(JACK 6.3mm)
CW Key input port(JACK 6.3mm)
External Control port with 9 power switch and RS-485 interface(D-SUB-15)
External Control 2 port for Automotive whip antenna 9310 from Stealth Telecom.
Electret Microphone input(line)(JACK 6.3mm)
Dynamic Microphone input with PTT switch for MH-31(RJ-45)
Headphones output(line)(JACK 6.3mm)
Ethernet connector(RJ-45)
RS-232 connector(DB9)
MIC, LIN, Phone(Jack 3.5mm) - Embedded PC's sound card, for example, for Skype via your transceiver etc.
DC input 12-15V 5A / AC input 220 V 1.5-2A.
HDMI connector for external display.
2xUSB connectors.
"Ground" connector.

Approximate price:
Basic version: 2500 EURO (without options).
Full version: 3000 EURO (with WiFi, GPS, ATU)
Software:
ExpertSDR2(all updates) - is free.
Linux OS - is free.
Windows 7 Home Basic - 100 EUR

In front panel may be changed design after 6-10 month, but already right now we have preorders on this design. Transceiver SunSDR-MB1 is available for order.

















 
Последнее редактирование: 07.08.2013 22:01 Редактировал VassiL.
Василий, Vasily,
Expert Electronics
Для добавления сообщений Вы должны зарегистрироваться или авторизоваться
#5131
Michel VE2XK
Новый участник
Постов: 2
Пользователь в оффлайне Кликните здесь, чтобы посмотреть профиль этого пользователя
Re:Stand Alone Software defined Radio =SunSDR-MB1= Добавлено 27.09.2013 18:05  
Hello,

Is this transceiver already available to buy somewhere ??
Is a 120 Volts version available for North America ??

Do SunSDR-MB1 have a 6M LNA inside and how much is the MDS on 6M by 500 hz ??
How much is the MDS on any band ??

Can SunSDR-MB1 Do E-SSB ?? If yes how wide by transmit and how much wide by listen ??

There is several technical performances informations i missed .


Thanks in advance

73's

Michel VE2XK
 
Для добавления сообщений Вы должны зарегистрироваться или авторизоваться
#5134
VassiL
Разработчик SDR-техники, Developer of SDR
Модератор
Постов: 857
Пользователь в оффлайне Кликните здесь, чтобы посмотреть профиль этого пользователя
ICQ#: 473527881 Пол: Мужской expert_electronics Expert Electronics - SunSDR 123 Страна, город: Taganrog День рождения: 04/15
Re:Stand Alone Software defined Radio =SunSDR-MB1= Добавлено 28.09.2013 10:34  
Hello Michel,
This transceiver is prototype and we have only one device. At the present time we are create a new design for this transceiver and it will very interesting. In near future we will open for all our new project of SunSDR-MB1 transceiver.

120 V version is not available yet but we will try to find the same power supply for North America.

In SunSDR-MB1 we are use SunSDR2 platform and all characteristics the same as in the SunSDR2 transceiver. In all HF bands and also in 6M band is used switchable+12dB LNA. With this LNA MDS is -136dBm in 500Hz. Without LNA MDS is -126dBm in 500Hz. In range 1-65MHz MDS is the same as 6M band.

Yes, SunSDR-MB1 can do ESSB. User can set RX filter bandwidth 0-20kHz and can set the same TX filter. It can be adjustable.

All basic technical parameters you can find in the SunSDR2 tech.parameters is here, but output power will 125W + Tuner in HF and 30W on VHF.

 
Последнее редактирование: 28.09.2013 17:54 Редактировал VassiL.
Василий, Vasily,
Expert Electronics
Для добавления сообщений Вы должны зарегистрироваться или авторизоваться
#5142
Michel VE2XK
Новый участник
Постов: 2
Пользователь в оффлайне Кликните здесь, чтобы посмотреть профиль этого пользователя
Re:Stand Alone Software defined Radio =SunSDR-MB1= Добавлено 28.09.2013 21:09  
Hello Vassil,

Thanks for all your informations .
I have few more other questions :

Will SunSDR-MB1 have full duty cycle capability ?

Will SunSDR-MB1 have RX diversity by using 2 independants antenna port ?

Will SunSDR-MB1 have RX diversity by using 2 independants antenna port on 6M band also ?

Will SunSDR-MB1 have the capability to use both receiver (rx1 & rx2) on 6M BUT on two differente antenna and the capability to use in this way the 6M
preamp on each RX too (on different antenna mean)
Example :
RX1 on antenna port 1 with 6M yagi antenna with build in preamp in use
RX2 on antenna port 2 with another 6M antenna with build in preamp in use

Will SunSDR-MB1 have the capability to use a dedicated amplifier PTT switching on each antenna port (wishlist) . in this way more amplifier connectivity.


Thanks in advance Vassil.

Best 73's Michel VE2XK
 
Последнее редактирование: 29.09.2013 18:03 Редактировал Michel VE2XK.
Для добавления сообщений Вы должны зарегистрироваться или авторизоваться
#5143
VassiL
Разработчик SDR-техники, Developer of SDR
Модератор
Постов: 857
Пользователь в оффлайне Кликните здесь, чтобы посмотреть профиль этого пользователя
ICQ#: 473527881 Пол: Мужской expert_electronics Expert Electronics - SunSDR 123 Страна, город: Taganrog День рождения: 04/15
Re:Stand Alone Software defined Radio =SunSDR-MB1= Добавлено 29.09.2013 10:16  
To Michel VE2XK,
All your questions has an answer yes if the transceiver has two(or more) independent receivers stages, like two High speed ADC, BPFs, LNA etc.. But at the present time we are use one receivers stage - one ADC, BPF unit, LNA, ATT and wide frequency range 0...80MHz. User can to receive two or more bands by software defined receivers but via one antenna port. Transceiver has two switchable antenna ports for range 0...80MHz and one antenna port for 80...160MHz, but only one port can be used at the same time.
I think that we will use in future two(or more) independent receivers with all features you want. But I have not more info about dead lines... At first we will start with one hardware wide receiver and next other.

P.S. Power supply in SunSDR-MB1 works from input voltage AC 100...240V 50/60Hz. It will work in North America too.
 
Последнее редактирование: 29.09.2013 15:27 Редактировал VassiL.
Василий, Vasily,
Expert Electronics
Для добавления сообщений Вы должны зарегистрироваться или авторизоваться
ВверхСтраница: 1
Главная   Форум